U0243low severityNetwork
Lost Communication with Trailer Hitch Module
on 2010 Mitsubishi Eclipse 3.8L V6 · FWD
What this code means
Cannot communicate with the integrated trailer hitch control module.
Symptoms
- Trailer lights not working
- Trailer brake output disabled
- Tow/haul mode limited
- Trailer sway control disabled
Common causes
- Hitch module failure
- CAN bus wiring
- Module power loss
- Fuse blown
- Trailer connector corrosion
Diagnostic steps
- Check hitch module fuse
- Test power and ground
- Check CAN wiring
- Inspect trailer connector
- Test trailer light outputs
Repair notes
Check fuses and trailer connector. Corrosion at trailer plug is the most common cause.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus