C0086moderate severityChassis
Master Cylinder Pressure Sensor Circuit Low
on 2008 Mitsubishi Lancer 2.4L I4 · FWD
What this code means
Low voltage from the master cylinder brake pressure sensor, indicating a circuit fault.
Symptoms
- ABS light on
- Stability control disabled
- Brake assist may not function
- Regenerative braking malfunction on hybrids
Common causes
- Sensor short to ground
- Faulty pressure sensor
- Connector pin damage
- Low battery voltage to sensor
Diagnostic steps
- Test sensor supply voltage
- Check signal wire for shorts to ground
- Inspect sensor connector
- Test sensor output while pressing brake pedal
- Check for related ABS module codes
Repair notes
Replace master cylinder pressure sensor. Verify supply voltage.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic