Free API
P1195moderate severityPowertrain

Barometric Pressure Sensor Circuit Malfunction

on 2014 Mitsubishi Outlander 2.4L I4 · FWD

What this code means

The barometric pressure sensor signal is out of range. This affects fuel and boost calculations at varying altitudes.

Symptoms

  • Poor performance at altitude
  • Rough running
  • Check engine light on

Common causes

  • Faulty baro sensor
  • Wiring or connector fault
  • Corroded terminals
  • Failed ECM input circuit

Diagnostic steps

  1. Scan for stored codes
  2. Check sensor signal voltage
  3. Inspect wiring and connector
  4. Compare reading to known baro value

Other Powertrain codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2014 Mitsubishi Outlander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mitsubishi Outlander — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →