Free API
P1795moderate severityPowertrain

Throttle Position Signal (from ECM) Malfunction

on 2014 Mitsubishi Outlander 2.4L I4 · FWD

What this code means

The TCM received a bad or missing throttle position signal from the ECM. This affects shift timing and torque management.

Symptoms

  • Erratic shifting
  • Poor throttle response
  • Transmission warning light

Common causes

  • Faulty throttle position sensor
  • Damaged ECM/TCM wiring
  • Communication fault
  • Faulty ECM

Diagnostic steps

  1. Scan ECM and TCM for codes
  2. Check throttle position sensor signal
  3. Inspect wiring between modules
  4. Verify ECM signal output

Other Powertrain codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2014 Mitsubishi Outlander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Mitsubishi Outlander — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →