Free API
P0678low severityPowertrain

Cylinder 8 Glow Plug Circuit

on 2013 Nissan Altima 3.5L V6 VQ35DE · FWD

What this code means

The PCM detected a fault in the glow plug control circuit for cylinder 8. Failed glow plugs cause difficult cold starts and excessive smoke.

Symptoms

  • Difficult cold starting
  • White smoke when cold
  • Warning light active

Common causes

  • Faulty glow plug cylinder 8
  • Corroded glow plug harness
  • Bad glow plug control module
  • Blown fuse

Diagnostic steps

  1. Scan module for fault codes
  2. Measure cylinder 8 glow plug resistance
  3. Check wiring for damage
  4. Test control module command signal

Other Powertrain codes on this vehicle

🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Nissan Altima repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Nissan Altima — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →