The 2013 Nissan Juke with the 1.6L turbo (MR16DDT) is a fun little crossover plagued by CVT cooler failures and catastrophic turbo engine issues tied to poor oil change habits and inherent design flaws in the piston ring lands.
CVT Transmission Oil Cooler Failure and Fluid Contamination
Common · high severity
Typical onset: 60,000-100,000 mi
Symptoms: Transmission slipping or shuddering during acceleration, Metallic debris in CVT fluid, Coolant mixing with transmission fluid (strawberry milkshake in reservoir), Check engine light with CVT-related codes (P0868, P17F0)
Fix: Replace transmission oil cooler and flush entire CVT system, sometimes requires full CVT replacement if contamination has caused internal damage. 4-6 hours labor for cooler and flush; 8-12 hours if CVT replacement needed.
Estimated cost: $800-1,200 for cooler/flush; $3,500-5,500 for CVT replacement
Turbo Engine Piston Ring Land Failure and Catastrophic Engine Damage
Occasional · high severity
Typical onset: 80,000-150,000 mi
Symptoms: Excessive oil consumption (1 qt per 1,000 mi or worse), Blue smoke from exhaust on startup or acceleration, Loss of power and boost pressure, Knocking or rattling from engine under load, Metal shavings in oil, low compression on one or more cylinders
Fix: MR16DDT has weak piston ring lands that crack under boost, especially if oil changes are delayed. Requires complete engine rebuild or short block replacement. 18-24 hours labor for proper rebuild with machine work.
Estimated cost: $4,500-7,500 for rebuild; $5,500-8,500 for reman short block installed
Transmission Mount Collapse
Common · medium severity
Typical onset: 70,000-120,000 mi
Symptoms: Clunking or banging when shifting from Park to Drive or Reverse, Excessive vibration at idle, Visible sagging or torn rubber on mount inspection, Drivetrain feels loose during throttle application
Fix: The upper transmission mount (torque mount) is known to fail prematurely. Replacement is straightforward but requires supporting the transmission. 1.5-2.5 hours labor.
Estimated cost: $250-450
Turbocharger Wastegate Actuator and Oil Feed Line Issues
Occasional · medium severity
Typical onset: 90,000-140,000 mi
Symptoms: Check engine light with boost control codes (P0243, P0299), Turbo whine or whistling noise, Loss of power, sluggish acceleration, Oil leaking from turbo area or blue smoke if oil feed line fails
Fix: Wastegate actuators stick or fail; oil feed lines crack and starve the turbo. Actuator replacement is 2-3 hours; full turbo replacement if oil starvation caused bearing damage is 4-6 hours.
Estimated cost: $400-800 for actuator; $1,200-2,200 for turbo replacement
Fuel Filter Clogging and Fuel System Contamination
Occasional · medium severity
Symptoms: Hard starting or extended cranking, Hesitation or stumbling under acceleration, Loss of power at highway speeds, Check engine light with fuel trim or pressure codes (P0171, P0087)
Fix: The in-tank fuel filter can clog prematurely, especially with poor fuel quality. Requires dropping the tank to access. 2-3 hours labor.
Estimated cost: $300-550
Ignition Switch Recall and Persistent Starting Issues
Occasional · medium severity
Symptoms: Engine cranks but won't start, Intermittent no-start condition, Key FOB not detected errors, Electrical accessories work but starter won't engage
Fix: NHTSA recall 14V-053 addressed ignition switch failures, but some units still experience issues post-recall. Replacement is 1-1.5 hours if recall wasn't completed or switch fails again.
Estimated cost: $200-400 if out-of-pocket (free if recall applicable)
Timing Chain Stretch and Guide Wear
Rare · high severity
Typical onset: 120,000-180,000 mi
Symptoms: Rattling noise from front of engine on cold start, Check engine light with cam/crank correlation codes (P0011, P0021), Rough idle or misfires, Metal debris in oil
Fix: While less common than the piston issues, the timing chain can stretch if oil changes are neglected. Requires front engine disassembly, chain, guides, and tensioner replacement. 8-12 hours labor.
Estimated cost: $1,800-3,200
Owner tips
Use ONLY Nissan NS-2 or NS-3 CVT fluid — aftermarket fluids accelerate CVT death
Change engine oil every 3,000-5,000 miles with quality synthetic to extend turbo and piston life
Inspect CVT cooler and fluid condition at every service; catch contamination early
Let the turbo idle for 30 seconds before shutdown to prevent oil coking in the feed lines
Budget $500/year for 'Juke tax' — these need more frequent attention than typical economy crossovers
Fun and quirky when running right, but the CVT cooler and engine internals are ticking time bombs — only buy with full service records and a serious repair fund, or walk away.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
Fitment notes: Compact group 35 battery; located in engine bay
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2011-2017 Nissan Juke — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electric Power Steering Control Unit (EPS)2.5 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Behind instrument cluster, attached to steering column
⚠️ Not a separate module; function integrated in BCM; key programming requires security PIN from Nissan
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Nissan North America, Inc. (Nissan) is recalling certain model year 2014 Versa Sedan vehicles manufactured July 16, 2013, to January 29, 2014, 2013-2014 Cube vehicles manufactured July 3, 2013, to October 21, 2013, and 2013-2014 Juke vehicles manufactured July 3, 2013, to October 22, 2013. When exposed to hot temperatures, the affected vehicles have an engine start/stop button that may stick inside the button housing.
Consequence: If the engine start/stop button gets stuck in the housing, road vibrations may cause the engine to shut off unexpectedly while the vehicle is being driven, increasing the risk of a crash.
Remedy: Nissan will notify owners, and dealers will modify the start/stop switch housing, free of charge. The recall began on August 4, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
FUEL SYSTEM, GASOLINE · 14V683000
2014-11-28
Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.
Consequence: A fuel leak in the presence of an ignition source could cause a vehicle fire.
Remedy: Nissan will notify owners, and dealers will re-torque the fuel pressure sensors free of charge. The recall began on January 25, 2015. Owners may contact Nissan customer service at 1-800-647-7261.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2013 Nissan Juke 1.6L Turbo I4 and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Lexus & Toyota Mechanic · 20+ years.