🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2012–2021 NISSAN NV200

2.0L I4FWDAUTOMATICgasMR20DE
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this NV200
Every control module on the 2012-2017 Nissan NV200 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electric Power Steering Control Unit (EPS)2.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Behind instrument panel, attached to steering column
🔧 CONSULT-III Plus with NTIS
⚠️ Steering angle sensor calibration required after replacement; column removal needed
Anti-lock Brake System Control Unit (ABS)1.8 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Engine compartment, driver side near master cylinder
🔧 CONSULT-III or aftermarket scan tool
⚠️ Brake bleeding required; steering angle sensor calibration recommended
Body Control Module (BCM)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind instrument panel, driver side left of steering column
🔧 CONSULT-III Plus with NTIS
⚠️ Integrated CAN gateway; key registration and VIN programming required; dash removal needed
Around View Monitor Control Unit (AVM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Behind instrument panel, center stack area
🔧 CONSULT-III Plus with NTIS
⚠️ Optional equipment; camera calibration required; multiple camera inputs
Nissan Anti-Theft System Control Unit (NATS)1.5 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Integrated within BCM
🔧 CONSULT-III Plus with NTIS
⚠️ Key registration requires security PIN code; all keys must be present for programming
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, passenger side firewall behind battery
🔧 CONSULT-III Plus with NTIS
⚠️ VIN programming and immobilizer registration required; battery removal necessary for access
Automatic Air Conditioning Control Unit (A/C)1.2 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind center instrument panel, integrated with HVAC controls
🔧 CONSULT-III or aftermarket scan tool
⚠️ Self-diagnosis mode available; actuator relearn required
Occupant Classification System Control Unit (OCS)1.2 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Under front passenger seat
🔧 CONSULT-III Plus with NTIS
⚠️ Calibration required with specific weight; part of SRS system
Intelligent Power Distribution Module (IPDM-E/R)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, driver side fender near battery
🔧 CONSULT-III Plus with NTIS
⚠️ Controls fuel pump relay and multiple power distribution functions; VIN programming required
Transmission Control Module (TCM)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Engine compartment, passenger side firewall near ECM
🔧 CONSULT-III Plus with NTIS
⚠️ CVT models only; adaptive values relearn required after replacement
Supplemental Restraint System Control Module (SRS)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console area, below center stack
🔧 CONSULT-III Plus with NTIS
⚠️ VIN programming required; wait 3 minutes after battery disconnect before service
Combination Meter (METER)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument panel cluster
🔧 CONSULT-III Plus with NTIS
⚠️ Mileage programming required; VIN must match vehicle
Sonar Control Unit (SONAR)0.8 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind rear bumper, center mounted
🔧 CONSULT-III or aftermarket scan tool
⚠️ Optional equipment; sensor calibration recommended after replacement
Audio Visual Control Unit (AV)0.6 hr R&Rno coding
📍 Center instrument panel, dash mounted
⚠️ Radio code may be required on some models; plug-and-play on most
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →