🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2022 NISSAN NV2500

5.6L V8RWDAUTOMATICgasVK56VD
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this NV2500
Every control module on the 2012-2023 Nissan NV2500 — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
Electric Power Steering Control Unit (EPS)2.5 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Steering column, integrated with steering gear assembly
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Steering angle sensor calibration mandatory; VIN programming required; steering wheel must be centered during installation
Body Control Module (BCM)1.8 hr R&Rdealer / factory tool +1.0 hr▸ programming details
📍 Behind driver side lower dash panel, above fuse box
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ All keys must be re-registered; NATS immobilizer pairing with ECM required; vehicle configuration data must be transferred
CAN Gateway (GW)1.8 hr R&Rdealer / factory tool +0.9 hr▸ programming details
📍 Integrated within BCM on 2012-2017; separate module behind dash on 2018+ models
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ 2018+ models have dedicated gateway; replacement requires full vehicle configuration programming
Around View Monitor Control Unit (AVM)1.5 hr R&Rdealer / factory tool +0.7 hr▸ programming details
📍 Behind center dash, near AV unit (when equipped with 360-degree camera)
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Camera calibration required; only on high-trim models with around-view monitor system
Occupant Classification System Control Unit (OCS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Under front passenger seat, integrated with seat frame
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Calibration with specific weight standards required; safety-critical system
Automatic Air Conditioning Control Unit (A/C)1.5 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind center dash, integrated with HVAC control panel
🔧 Nissan CONSULT-III Plus or aftermarket scan tool
⚠️ Actuator calibration relearn required after installation
Transmission Control Module (TCM)1.5 hr R&Rdealer / factory tool +0.7 hr▸ programming details
📍 Engine bay, passenger side firewall, near transmission bellhousing (5-speed auto models)
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Adaptive shift values must be reset; VIN programming required on 2018+ models
Supplemental Restraint System Control Module (SRS)1.2 hr R&Raftermarket tool +0.4 hr▸ programming details
📍 Center console area, under front seats or behind center trim panel
🔧 Nissan CONSULT-III Plus or Autel/Launch aftermarket tools
⚠️ Crash data must be cleared; occupant classification system calibration may be needed
Engine Control Module (ECM)1.2 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine bay, driver side firewall, mounted on bulkhead near brake master cylinder
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ VIN programming and immobilizer registration required; NATS pairing with BCM and keys mandatory
Anti-lock Brake System Control Unit (ABS)1.0 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Engine bay, driver side frame rail near master cylinder
🔧 Nissan CONSULT-III Plus or aftermarket scan tool
⚠️ Brake bleeding required; steering angle sensor calibration recommended after replacement
Intelligent Power Distribution Module (IPDM-E/R)1.0 hr R&Raftermarket tool +0.4 hr▸ programming details
📍 Engine bay, driver side fender well or near battery
🔧 Nissan CONSULT-III Plus or Autel/Launch aftermarket tools
⚠️ Controls fuel pump relay and multiple power distribution functions; some relearn procedures required
Audio Visual Control Unit (AV)1.0 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Center dash, behind radio/display screen
🔧 Nissan CONSULT-III Plus or aftermarket scan tool
⚠️ Radio anti-theft code may be required; Bluetooth pairing must be re-established
Combination Meter (METER)0.8 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Instrument panel, behind gauge cluster lens
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Odometer programming required by law; VIN and mileage must be transferred from old unit
Sonar Control Unit (SONAR)0.8 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Rear cargo area, driver side panel near tail light (when equipped)
🔧 Nissan CONSULT-III Plus or aftermarket scan tool
⚠️ Sensor calibration relearn required; only on models with parking sensors
Nissan Anti-Theft System Control Unit (NATS)dealer / factory tool +0.8 hr▸ programming details
📍 Integrated within BCM (2012-2017) or IPDM-E/R (varies by year)
🔧 Nissan CONSULT-III Plus with NTIS subscription
⚠️ Not a separate physical module; function integrated in BCM; all keys must be registered; ECM pairing required
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included. Built by the same team.
Try ShopBase →