Fitment notes: AGM battery required for start-stop system; located in engine compartment
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Control Modules — 2025 Nissan Pathfinder
Every control module on the 2023-2026 Nissan Pathfinder — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
📍 Inside transmission case, integrated with valve body (CVT models)
🔧 CONSULT-III Plus with NTIS subscription
⚠️ CVT transmission requires complete transmission disassembly to access TCM. VIN programming and adaptive value initialization required. CVT fluid replacement mandatory during R&R. 9-speed automatic (if equipped) has external TCM on transmission case.
Electric Power Steering Control Module (EPS)2.5 hr R&Rdealer / factory tool +0.6 hr▸ programming details
📍 Integrated with steering column assembly, below instrument panel
🔧 CONSULT-III Plus with NTIS subscription
⚠️ Column-mounted electric assist. Steering angle sensor calibration required after replacement. VIN programming and torque sensor zero-point calibration mandatory.
Head-Up Display Control Module (HUD)2.0 hr R&Rdealer / factory tool +0.5 hrPlatinum trim with Head-Up Display▸ programming details
📍 Behind instrument panel, above steering column
🔧 CONSULT-III Plus
⚠️ Projects vehicle information onto windshield. Alignment calibration required after replacement. VIN programming required.
Transfer Control Module (TCCM)2.0 hr R&Rrelearn only +0.4 hr4WD models▸ programming details
📍 Under vehicle, mounted to transfer case assembly
🔧 CONSULT-III Plus or self-relearn
⚠️ Controls 4WD mode selection and torque distribution. Transfer case position relearn required after replacement. VIN programming not required.
Anti-lock Brake System Control Module (ABS)1.8 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Engine compartment, driver side inner fender near strut tower
🔧 CONSULT-III Plus or Autel/Launch with brake bleed function
⚠️ Integrated hydraulic unit. Brake system bleeding required after replacement. VIN programming not required but brake pedal feel initialization recommended.
Automatic Air Conditioning Control Module (A/C)1.8 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind center stack, integrated with HVAC control panel
🔧 Self-relearn procedure or CONSULT-III Plus
⚠️ Dual-zone or tri-zone climate control depending on trim. Actuator relearn procedure required after replacement (can be performed without scan tool using button sequence). VIN programming not required.
Body Control Module (BCM)1.5 hr R&Rdealer / factory tool +1.2 hr▸ programming details
📍 Behind driver side lower dash panel, above fuse box
🔧 CONSULT-III Plus with NTIS subscription
⚠️ Controls lighting, door locks, wipers, and integrates with NATS immobilizer. All Intelligent Keys must be re-registered after replacement. Configuration includes option coding for installed features.
Around View Monitor Control Module (AVM)1.5 hr R&Rdealer / factory tool +1.0 hrwith Around View Monitor (360-degree camera)▸ programming details
📍 Behind AVN unit in center stack
🔧 CONSULT-III Plus with camera calibration procedure
⚠️ Processes four camera inputs for 360-degree view. Camera calibration using alignment mat required after replacement. VIN programming required.
Intelligent Power Distribution Module (IPDM)1.5 hr R&Rdealer / factory tool +0.8 hr▸ programming details
📍 Engine compartment, driver side fender, mounted above battery
🔧 CONSULT-III Plus with NTIS subscription
⚠️ Integrated fuse/relay box controlling fuel pump, cooling fans, and multiple power distribution functions. VIN programming and system configuration required. Contains NATS immobilizer functions.
📍 Engine compartment, driver side fender, integrated with Intelligent Power Distribution Module
🔧 CONSULT-III Plus with NTIS subscription
⚠️ Integrated with IPDM fuse/relay box. Controls Intelligent Key system and immobilizer. All keys must be re-registered after replacement. ECM and BCM pairing required.
Radar Control Module (RADAR)1.5 hr R&Rdealer / factory tool +1.5 hrwith ProPILOT Assist 2.0 or Intelligent Cruise Control▸ programming details
📍 Behind front grille, center position behind Nissan emblem
🔧 CONSULT-III Plus with radar aiming procedure
⚠️ Millimeter-wave radar for adaptive cruise and collision mitigation. Static and dynamic aiming required after replacement. Front-end collision or grille removal requires recalibration.
📍 Engine compartment, driver side firewall, mounted on bracket near brake master cylinder
🔧 CONSULT-III Plus with NTIS subscription
⚠️ VIN programming and immobilizer pairing required. Some aftermarket tools (Autel MaxiSys Ultra, Launch X431 PAD VII) can program with J2534 pass-through and OEM software subscription.
Power Back Door Control Module (PBD)1.2 hr R&Rrelearn only +0.4 hrwith power liftgate▸ programming details
📍 Liftgate, driver side lower trim panel
🔧 CONSULT-III Plus or aftermarket with liftgate calibration
⚠️ Controls power liftgate operation and hands-free opening. Height position relearn required after replacement. VIN programming not required.
Audio Visual Navigation Unit (AVN)1.2 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Center stack, behind touchscreen display
🔧 Self-initialization or CONSULT-III Plus
⚠️ 9-inch or 12.3-inch touchscreen depending on trim. VIN programming not required but system initialization and camera calibration (if equipped) needed. Wireless Apple CarPlay/Android Auto standard.
⚠️ Manages CAN bus communication between networks. VIN programming required. Enhanced security features on 2023+ models control diagnostic access more strictly.
Trailer Brake Control Module (TBCM)1.0 hr R&Rrelearn only +0.3 hrwith factory trailer brake controller▸ programming details
📍 Behind driver side lower dash panel, near fuse box
🔧 CONSULT-III Plus or self-calibration
⚠️ Integrated trailer brake controller. Trailer brake gain calibration required after replacement. VIN programming not required.
Supplemental Restraint System Control Module (SRS)1.0 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console, beneath center stack trim, above transmission tunnel
🔧 CONSULT-III Plus with NTIS subscription
⚠️ VIN programming required. Crash data stored in module; replacement requires configuration for installed airbag/seatbelt options. Battery must be disconnected 3+ minutes before removal.
Telematics Control Unit (TCU)1.0 hr R&Rdealer / factory tool +0.8 hrwith NissanConnect Services▸ programming details
📍 Behind glove box, mounted to HVAC housing
🔧 CONSULT-III Plus with NTIS subscription and NissanConnect activation
⚠️ Provides cellular connectivity for remote services, emergency call, Wi-Fi hotspot, and over-the-air updates. Requires dealer activation and subscription pairing after replacement.
Adaptive Front Lighting System Control Module (AFS)0.8 hr R&Rrelearn only +0.3 hrwith LED headlights and adaptive lighting▸ programming details
📍 Behind driver side headlight assembly
🔧 CONSULT-III Plus or aftermarket with AFS calibration
⚠️ Controls headlight leveling and cornering function. Headlight aim calibration required after replacement. VIN programming not required but zero-point calibration mandatory.
Driver Seat Control Module (DSCM)0.8 hr R&Rrelearn only +0.2 hrwith power driver seat and memory▸ programming details
📍 Under driver seat, mounted to seat frame
🔧 Self-relearn or CONSULT-III Plus
⚠️ Controls power seat adjustment and memory positions. Memory position relearn required after replacement. VIN programming not required.
⚠️ 12.3-inch digital cluster standard on higher trims. Odometer programming required to transfer mileage from old module. VIN programming mandatory. Some aftermarket tools can program mileage but dealer tool recommended for legal compliance.
Sonar Control Module (SONAR)0.8 hr R&Rrelearn only +0.2 hrwith rear parking sensors▸ programming details
📍 Behind rear bumper, center position above hitch receiver area
🔧 CONSULT-III Plus or self-calibration
⚠️ Controls front and rear parking sensors. Self-calibration occurs automatically after driving. VIN programming not required.
Power Window Master Switch (PWMS)0.5 hr R&Rrelearn only +0.1 hr▸ programming details
📍 Driver door, integrated with master window switch assembly
🔧 Manual auto-up/down relearn procedure
⚠️ Controls all four power windows. Auto-up/down relearn required after replacement (performed by cycling each window fully up/down with switch held).
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:CALIPER · 25V173000
2025-03-19
Nissan North America, Inc. (Nissan) is recalling certain 2025 Murano, Pathfinder, and INFINITI QX60 vehicles. One or both front brake caliper assemblies may have reduced strength and could break. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."
Consequence: A broken front brake caliper can cause a loss of front brake function, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front brake caliper assemblies as necessary, free of charge. Owner notification letters were mailed May 9, 2025. Owners may contact Nissan's customer service at 800-647-7261 or INFINITI's customer service at 1-800-662-6200. Nissan's numbers for this recall are PD137 and PD138.
Vehicle Info — 2025 Nissan Pathfinder
Fuel economy (EPA)
City
20mpg
Highway
27mpg
Combined
23mpg
Fuel
Regular Gasoline
Capability & size
Seating
7seats
EPA class
Small Sport Utility Vehicle 4WD
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2025 Nissan Pathfinder 3.5L V6 VQ35DE and can vary by trim.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.