2.0L I4 MR20DEFWDCVTgasMR20DE
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1443low severityPowertrain

EVAP Canister Control Vacuum Switch Circuit

on 2010 Nissan Sentra 2.0L I4 MR20DE · FWD

What this code means

Fault in EVAP canister control vacuum switch for leak detection.

Symptoms

  • CEL
  • EVAP monitor incomplete
  • Failed emissions

Common causes

  • Faulty vacuum switch
  • Damaged wiring
  • EVAP leak
  • Faulty purge solenoid

Diagnostic steps

  1. Test vacuum switch
  2. Inspect wiring
  3. Smoke test EVAP
  4. Test purge solenoid

Repair notes

Replace vacuum switch or repair leak.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2010 Nissan Sentra repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Nissan Sentra — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →