B0110low severityBody
Keyless Entry System General Fault
on 2014 Nissan Skyline 3.5L V6 VQ35HR · RWD
What this code means
A general malfunction in the keyless entry system. The system is not responding to remote key fob commands.
Symptoms
- Remote lock/unlock not working
- Key fob buttons unresponsive
- Must use physical key
- All remote functions lost
Common causes
- Dead key fob battery
- Faulty keyless entry receiver
- Antenna issue
- BCM keyless entry module failure
- RF interference
Diagnostic steps
- Replace key fob battery
- Test with second key fob
- Check keyless entry antenna
- Scan BCM for related codes
- Check for RF interference sources
Repair notes
Replace key fob battery first. If issue persists, check receiver module and antenna.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open