Fitment notes: AGM battery required for hybrid e-Power system; auxiliary 12V battery; main traction battery is lithium-ion
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Every control module on the 2021-2026 Nissan X-Trail MX — where it lives, replacement time, and what it takes to program a replacement. Modules marked dealer / factory tool won't work after a part swap alone — budget for programming.
⚠️ Controls lighting, wipers, door locks, power windows. VIN programming and Intelligent Key registration required. All keys must be re-registered after replacement. Gateway functions integrated.
📍 Engine compartment, driver side fender, integrated with Intelligent Power Distribution Module
🔧 CONSULT-III Plus with NTIS subscription
⚠️ All Intelligent Key fobs must be re-registered. ECM and BCM pairing required. Security PIN code from Nissan required for programming. Enhanced encryption on 2021+ models.
Radar Control Module (RADAR)1.8 hr R&Rdealer / factory tool +1.2 hrwith ProPILOT Assist or Intelligent Cruise Control▸ programming details
📍 Behind front bumper, center, behind lower grille opening
🔧 CONSULT-III Plus with NTIS subscription and radar alignment tool
⚠️ Radar aiming and calibration mandatory after replacement or front-end collision repair. Requires specific alignment targets and procedure. Enhanced range on 2021+ models.
📍 Behind instrument panel, center console area, near BCM
🔧 CONSULT-III Plus with NTIS subscription
⚠️ CAN bus gateway managing communication between networks. VIN programming required. Enhanced security gateway functions on 2021+ models restrict aftermarket access to certain modules.
Supplemental Restraint System Control Module (SRS)1.5 hr R&Rdealer / factory tool +0.5 hr▸ programming details
📍 Center console tunnel, below center stack, behind climate control unit
🔧 CONSULT-III Plus with NTIS subscription
⚠️ VIN programming required. Crash data must be cleared. All airbag sensors and seat belt pretensioners must be verified before clearing codes.
Around View Monitor Control Module (AVM)1.5 hr R&Rdealer / factory tool +0.8 hrwith Around View Monitor (360-degree camera)▸ programming details
📍 Behind instrument panel, center, near AVN unit
🔧 CONSULT-III Plus with NTIS subscription for camera calibration
⚠️ Camera alignment and stitching calibration required. All four cameras must be functional for system operation. Enhanced resolution on 2021+ models.
Power Back Door Control Module (PBD)1.4 hr R&Raftermarket tool +0.3 hrwith power liftgate▸ programming details
📍 Rear liftgate, driver side hinge area, behind interior trim panel
🔧 Autel MaxiSys or Launch X431
⚠️ Liftgate position learning and pinch protection calibration required after replacement. Hands-free kick sensor on higher trims.
Automatic Air Conditioning Control Module (A/C)1.3 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Behind center instrument panel, integrated with climate control display unit
🔧 Self-learning procedure via button sequence
⚠️ Actuator relearn procedure required after replacement. No VIN programming needed.
📍 Engine compartment, driver side firewall, mounted on bulkhead below brake master cylinder
🔧 CONSULT-III Plus with NTIS subscription
⚠️ VIN programming and immobilizer pairing required. Enhanced security gateway protection on 2021+ models limits aftermarket programming capability.
Telematics Control Unit (TCU)1.2 hr R&Rdealer / factory tool +0.8 hrwith NissanConnect services▸ programming details
📍 Behind instrument panel, passenger side, near glove box
🔧 CONSULT-III Plus with NTIS subscription and NissanConnect activation
⚠️ Cellular subscription activation required through Nissan servers. VIN and account pairing mandatory. 2021+ models have 4G LTE connectivity.
Adaptive Front Lighting System Control Module (AFS)1.2 hr R&Raftermarket tool +0.4 hrwith LED or adaptive headlights▸ programming details
📍 Behind front bumper, driver side, near headlight assembly
🔧 Autel MaxiSys or Launch X431 for headlight aiming calibration
⚠️ Headlight aiming and leveling sensor calibration required after replacement. 2021+ models have updated LED matrix headlight option.
Intelligent Power Distribution Module (IPDM)1.0 hr R&Raftermarket tool +0.3 hr▸ programming details
📍 Engine compartment, driver side fender, mounted on inner fender panel
🔧 Autel MaxiSys or Launch X431
⚠️ Controls fuel pump, cooling fans, and multiple power distribution functions. VIN coding recommended but not always required for basic operation.
Lane Departure Warning Camera (LDW)1.0 hr R&Rdealer / factory tool +0.8 hrwith Lane Departure Warning or ProPILOT Assist▸ programming details
📍 Behind windshield, top center, integrated with rearview mirror base
🔧 CONSULT-III Plus with NTIS subscription for camera calibration
⚠️ Windshield camera calibration required after replacement or windshield replacement. Requires specific calibration targets and procedure.
Audio Visual Navigation Unit (AVN)1.0 hr R&Rrelearn only +0.3 hr▸ programming details
📍 Center instrument panel, integrated with touchscreen display in center stack
🔧 Self-initialization on power-up
⚠️ Camera and steering wheel control calibration may be required. 2021+ models feature larger 9-inch touchscreen with wireless Apple CarPlay/Android Auto.
Sonar Control Module (SONAR)0.9 hr R&Rrelearn only +0.2 hrwith parking sensors▸ programming details
📍 Behind rear bumper, center, above hitch area
🔧 Self-calibration on first drive cycle
⚠️ Sensor calibration occurs automatically after installation. No special tools required.
Driver Seat Control Module (DSCM)0.9 hr R&Rrelearn only +0.2 hrwith power driver seat memory▸ programming details
📍 Under driver seat, mounted to seat frame rail
🔧 Memory position relearn via seat controls
⚠️ Seat position memory must be reprogrammed after replacement. No special tools required.
📍 Instrument panel, behind gauge cluster lens, center of dashboard
🔧 CONSULT-III Plus with NTIS subscription
⚠️ Odometer programming required by law. VIN and configuration data must be transferred from old unit or programmed new. 2021+ models have enhanced digital display.
Power Window Master Switch (PWMS)0.6 hr R&Rrelearn only +0.2 hr▸ programming details
📍 Driver door, integrated with master window switch assembly in armrest
🔧 Window auto-up/down relearn procedure
⚠️ Window auto-up/down positions must be relearned after replacement via manual procedure.
Aftermarket tool coverage varies by software version and vehicle build — treat "aftermarket tool" rows as "usually possible" and verify against your tool maker's coverage list before promising a customer. Spot a wrong location or hour? Tell us — corrections ship fast here.
Size-standard part numbers — verify your connector type before buying. Rear blades are model-specific; check the package's vehicle list.
Fuel economy figures are EPA data via fueleconomy.gov (median across matching trims). Performance figures are compiled estimates for the 2026 Nissan X-Trail MX 1.5L I3 Turbo e-Power and can vary by trim.
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years.