Free API
Back to 2011 Porsche 911 GT3
Help
2011 PORSCHE 911 GT3
3.8L naturally aspirated flat-6 (Mezger, 435 hp)•RWD•DCT•gas
1 active safety recall on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor488Torque2145Fluid8DTC1824Battery1Maintenance0Recalls1
Fluid · Engine Oil

Engine Oil

for 2011 Porsche 911 GT3 3.8L naturally aspirated flat-6 (Mezger, 435 hp) · RWD
Fluid Type
0W-40 full synthetic
Spec: Porsche C30 / API SN
Capacity
9.5qt
8.99 L
Drain & Refill
9.5 qt
8.99 L
Change Interval
5,000 mi
8,045 km
Data quality
Book-style estimate
Not yet expert-verified. Have the real number? Correct it below — takes 30 seconds.

Notes

997.2 GT3 with 3.8L DFI engine (data shows 3.6L but 2010-2012 GT3 used 3.8L). C30 spec required for direct injection. Oil change includes filter.

Buy on Amazon
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other fluid systems on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2011 Porsche 911 GT3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Porsche 911 GT3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →