U0404moderate severityNetwork
Invalid Data Received from Gear Shift Module
on 2011 Porsche Cayenne 3.6L V6 ยท AWD
What this code means
The data received from the gear shift position module is invalid or not within expected range.
Symptoms
- Incorrect gear display
- Shifter position not recognized
- Transmission defaulting to safe mode
- Cannot select some gears
Common causes
- Gear shift sensor fault
- Wiring issue to shift module
- Shift module calibration lost
- CAN bus noise
Diagnostic steps
- Check gear shift module for codes
- Test shift position sensor outputs
- Check CAN bus wiring to shift module
- Recalibrate shift module
- Inspect shift mechanism
Repair notes
Recalibrate or replace gear shift module. Check wiring to shifter assembly.
๐ Don't have a code reader?
Any of these will read and clear this code โ pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 โ
No-phone-needed handheld โ reads, clears, live data, freeze frame.
โ ANCEL official store
Serious DIY~$100
BlueDriver Pro โ
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S โ
Bidirectional tests, service resets, all systems.
โ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro โ
Full-system pro platform โ topology mapping, ECU coding, the works.
โ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases โ how we link. This never changes the specs we publish.
Other Network codes on this vehicle
00003
Control Module - Defective
01304
Radio - No Communication
01312
Powertrain Data Bus - Defective
01315
Transmission Control Module (TCM) - No Communication
01316
ABS Control Module - No Communication
01317
Instrument Cluster Control Module (J285) - No Communication
01318
Immobilizer Control Module - No Communication
01321
Airbag Control Module - No Communication
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance