Free API
3.9L V64WDgasMagnum
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0368moderate severityPowertrain

Camshaft Position Sensor B Circuit High (Bank 1)

on 2000 Ram 1500 3.9L V6 · 4WD

What this code means

The PCM detected an abnormally high voltage signal from the bank 1 camshaft position sensor B circuit. This can affect timing calculations and engine performance.

Symptoms

  • Check engine light on
  • Rough running or stalling
  • Hard starting

Common causes

  • Faulty camshaft position sensor
  • Wiring short to voltage
  • Corroded connector
  • Damaged PCM

Diagnostic steps

  1. Scan and record freeze frame data
  2. Inspect sensor connector and wiring
  3. Measure sensor signal voltage
  4. Test or replace camshaft position sensor

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2000 Ram 1500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 1500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →