Free API
3.9L V64WDgasMagnum
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P2509high severityPowertrain

ECM/PCM Power Input Signal Intermittent

on 2000 Ram 1500 3.9L V6 · 4WD

What this code means

The engine controller detected an intermittent loss of power at its main power input. This can cause the module to reset or lose data during operation.

Symptoms

  • Intermittent stalling
  • Check engine light on
  • Random driveability issues

Common causes

  • Loose or corroded power connector
  • Faulty ignition switch or relay
  • Damaged wiring or poor ground
  • Failing PCM

Diagnostic steps

  1. Check battery and ground connections
  2. Inspect PCM power feed wiring and connectors
  3. Test power supply relay and ignition switch
  4. Wiggle-test harness while monitoring voltage

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2000 Ram 1500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 1500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →