Free API
3.9L V64WDgasMagnum
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P2737high severityPowertrain

Pressure Control Solenoid 'G' Control Circuit Low

on 2000 Ram 1500 3.9L V6 · 4WD

What this code means

The control circuit for pressure control solenoid G is reading low voltage. This usually means a short to ground or an open in the solenoid circuit affecting shift pressure.

Symptoms

  • Erratic shifting
  • Transmission slipping
  • Limp mode

Common causes

  • Short to ground in solenoid circuit
  • Failed pressure control solenoid G
  • Damaged wiring or connector
  • Faulty transmission control module

Diagnostic steps

  1. Retrieve stored trouble codes
  2. Inspect wiring and connectors for solenoid G
  3. Measure solenoid circuit voltage and resistance
  4. Test or replace pressure control solenoid

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2000 Ram 1500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 1500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →