Free API
3.9L V6RWDgasMagnum
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0989moderate severityPowertrain

Transmission Fluid Pressure Sensor/Switch E Circuit High

on 2001 Ram 1500 3.9L V6 · RWD

What this code means

The PCM detected a high voltage signal from the transmission fluid pressure sensor/switch E. This can cause incorrect pressure control and shifting problems.

Symptoms

  • Harsh shifts
  • Erratic shift behavior
  • Check engine light on

Common causes

  • Faulty fluid pressure sensor E
  • Open circuit in wiring
  • Poor connector contact
  • Faulty PCM/TCM

Diagnostic steps

  1. Retrieve stored codes
  2. Inspect sensor wiring for opens
  3. Check connector for corrosion
  4. Test sensor signal and reference voltage

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2001 Ram 1500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 1500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →