Free API
Help
2002 RAM 1500
5.7L V8•4WD•gas•HEMI
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
Repairs0Labor516Torque141Fluid11DTC1703Battery1Maintenance0Recalls0
P1757moderate severityPowertrain

Governor Pressure Above 3 PSI When Requested to be 0 PSI

on 2002 Ram 1500 5.7L V8 · 4WD

What this code means

Governor pressure remains above 3 PSI when it should be zero. This suggests a stuck solenoid or valve body fault.

Symptoms

  • Harsh shifts
  • Transmission slipping
  • Limp mode

Common causes

  • Stuck governor pressure solenoid
  • Debris in valve body
  • Dirty fluid
  • Faulty pressure sensor

Diagnostic steps

  1. Scan for transmission codes
  2. Check fluid condition
  3. Test solenoid operation
  4. Inspect and clean valve body
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITE
Shop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.

Other Powertrain codes on this vehicle

🔌 Need this data in your app? It's all in the free API →
🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Share:XRedditFBWhatsAppThreadsEmail
⚠ STILL BEHIND THE PAYWALL
The 2002 Ram 1500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 1500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →