6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
B2224moderate severityBody

Battery Voltage High

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The module detected system voltage above the acceptable range, indicating an overcharge condition. No direct OBD P-code equivalent exists for this body code.

Symptoms

  • Warning lights on
  • Bright or flickering lights
  • Modules acting erratically

Common causes

  • Faulty voltage regulator
  • Overcharging alternator
  • Bad ground connection
  • Faulty PCM control

Diagnostic steps

  1. Measure charging system voltage
  2. Inspect alternator regulator
  3. Check ground connections
  4. Repair overcharge fault and clear codes

Other Body codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →