Free API
6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0819moderate severityPowertrain

Up and Down Shift Switch to Transmission Range Correlation

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The PCM detected a mismatch between the up/down shift switch signals and the transmission range sensor. This indicates the two inputs do not agree with one another.

Symptoms

  • Erratic shifting
  • Manual mode not working
  • Warning light on

Common causes

  • Faulty shift switches
  • Faulty transmission range sensor
  • Damaged wiring or connector
  • Faulty PCM/TCM

Diagnostic steps

  1. Scan for related codes
  2. Compare switch and range sensor data
  3. Inspect wiring and connectors
  4. Verify sensor calibration

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →