6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P1765high severityPowertrain

Trans 12 Volt Supply Relay Control Circuit

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The transmission 12-volt supply relay control circuit has a fault. This can interrupt power to transmission solenoids.

Symptoms

  • No shifting or limp mode
  • Transmission codes
  • Loss of solenoid power

Common causes

  • Faulty transmission relay
  • Wiring or connector fault
  • Blown fuse
  • Failed PCM driver

Diagnostic steps

  1. Scan for transmission codes
  2. Check relay and fuse
  3. Test relay control circuit
  4. Inspect wiring to PCM

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →