Free API
6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P2537low severityPowertrain

Ignition Switch Accessory Position Circuit

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The module detected a fault in the ignition switch accessory position input circuit. The accessory position signal is missing, low, or high.

Symptoms

  • Accessories not working
  • Warning light on
  • Intermittent electrical faults

Common causes

  • Faulty ignition switch
  • Wiring or connector fault
  • Corroded terminals
  • Failed control module

Diagnostic steps

  1. Scan for stored codes
  2. Test ignition switch accessory signal
  3. Inspect related wiring
  4. Replace ignition switch if needed

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →