6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P3890moderate severityPowertrain

Exhaust Pressure Control Valve Malfunction

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The exhaust pressure control valve (exhaust brake or back-pressure valve) has a malfunction. This valve can be used for exhaust braking and to raise exhaust temperature.

Symptoms

  • Check Engine Light
  • No exhaust braking function
  • Reduced DPF regen capability
  • Engine braking feel reduced
  • Exhaust temperature management affected

Common causes

  • Valve actuator failure
  • Carbon buildup on valve
  • Vacuum/pressure line disconnected
  • Valve position sensor fault
  • Wiring harness damage

Diagnostic steps

  1. Command exhaust brake on/off with scan tool
  2. Monitor valve position vs commanded
  3. Check actuator vacuum/pressure supply
  4. Test valve position sensor
  5. Inspect valve for carbon deposits

Repair notes

Replace exhaust pressure control valve or actuator. Clean carbon deposits from valve and housing.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →