6.7L I6 Cummins Diesel4WDAUTOMATICdieselturbo
16 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P3891moderate severityPowertrain

Ammonia Slip Catalyst Efficiency Low

on 2013 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The ammonia slip catalyst (ASC) downstream of the SCR is not effectively converting excess ammonia to nitrogen. Ammonia is escaping to atmosphere.

Symptoms

  • Ammonia smell from exhaust
  • Check Engine Light
  • Failed emissions test
  • Eye and throat irritation near exhaust
  • White haze from tailpipe

Common causes

  • ASC catalyst degradation
  • SCR over-dosing DEF causing excess ammonia
  • ASC contamination
  • Exhaust temperature too low for ASC
  • ASC catalyst physically damaged

Diagnostic steps

  1. Measure ammonia levels downstream of ASC
  2. Check DEF dosing rates for over-dosing
  3. Monitor SCR and ASC temperatures
  4. Inspect ASC for physical damage
  5. Test downstream NOx and NH3 sensors

Repair notes

Replace ammonia slip catalyst. Correct any DEF over-dosing issue. Inspect SCR system calibration.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Ram 2500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 2500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →