B1011low severityBody

TPMS Receiver Antenna Circuit

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

Malfunction in the TPMS receiver antenna circuit. The antenna receives low-power RF signals from wheel-mounted sensors.

Symptoms

  • All TPMS sensors not reading
  • TPMS system fault
  • Receiver module reports no sensor signals

Common causes

  • Damaged TPMS antenna
  • Antenna cable disconnected
  • Antenna corroded
  • Aftermarket modification covering antenna

Diagnostic steps

  1. Inspect antenna location and condition
  2. Check antenna cable connection
  3. Test antenna circuit
  4. Look for aftermarket modifications near antenna

Repair notes

Replace TPMS antenna or reconnect cable.

Other Body codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →