B2103moderate severityBody
Antenna Not Connected
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
The immobilizer/RF antenna circuit is open or disconnected, so the module cannot detect the antenna. No direct OBD P-code equivalent exists for this body code.
Symptoms
- No-start or hard start
- Security light on
- Key not recognized
Common causes
- Disconnected antenna connector
- Broken antenna wiring
- Faulty antenna coil
- Corroded connector pins
Diagnostic steps
- Check antenna connector seating
- Inspect wiring for opens
- Measure antenna coil resistance
- Reconnect and clear codes
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open