B2200low severityBody

Front Parking Sensor Circuit

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

Malfunction in the front parking/proximity sensor system. One or more front ultrasonic sensors are not functioning.

Symptoms

  • Front parking sensors not beeping
  • Constant beeping with no obstacle
  • Parking sensor warning on display
  • One sensor position not working

Common causes

  • Faulty ultrasonic sensor
  • Sensor covered by dirt, ice, or paint
  • Wiring damage
  • Parking assist module failure
  • Sensor knocked out of alignment

Diagnostic steps

  1. Clean all front sensors
  2. Test each sensor individually with scan tool
  3. Inspect sensor wiring
  4. Check parking assist module
  5. Listen for sensor clicking (normal operation sound)

Repair notes

Replace faulty ultrasonic sensor. Clean sensors. Ensure sensors are properly seated in bumper.

Other Body codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →