C0088moderate severityChassis
Brake Fluid Level Sensor Circuit
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
Malfunction in the brake fluid level sensor circuit in the master cylinder reservoir.
Symptoms
- Brake warning light on
- Low brake fluid warning
- ABS may be disabled
- Stability control may be disabled
Common causes
- Low brake fluid level
- Faulty float sensor in reservoir
- Wiring to sensor damaged
- Sensor connector corroded
Diagnostic steps
- Check brake fluid level first
- Inspect sensor connector
- Test sensor circuit continuity
- Add brake fluid and verify warning clears
- Check for brake fluid leaks
Repair notes
Fill brake fluid to proper level. If fluid is low, inspect for leaks at calipers, hoses, and wheel cylinders. Replace sensor if faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic