C0240high severityChassis
Active Steering System Malfunction
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
General fault in the active steering system that adjusts steering ratio based on vehicle speed.
Symptoms
- Active steering warning light
- Fixed steering ratio
- Steering feels different at various speeds
- Driver assist features limited
Common causes
- Active steering motor failure
- Control module fault
- Position sensor malfunction
- CAN communication error
Diagnostic steps
- Scan for active steering module codes
- Test active steering motor
- Check CAN communication to module
- Inspect wiring and connectors
- Test position feedback sensors
Repair notes
Diagnose specific active steering component. System defaults to fixed ratio when faulted.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic