C0320moderate severityChassis

Ride Height Sensor Circuit Front Left

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

Malfunction in the front left ride height sensor used by the suspension control system.

Symptoms

  • Suspension warning light
  • Incorrect ride height at front left
  • Vehicle may default to lowest setting
  • Self-leveling headlights incorrect

Common causes

  • Faulty ride height sensor
  • Sensor linkage disconnected or bent
  • Wiring damage
  • Sensor corroded from road spray

Diagnostic steps

  1. Read ride height sensor value with scan tool
  2. Move sensor arm by hand and watch for signal change
  3. Inspect sensor linkage connection
  4. Check wiring and connector for damage
  5. Compare to other ride height sensors

Repair notes

Replace ride height sensor. Reconnect or replace linkage arm.

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →