P0234critical severityPowertrain

Turbocharger/Supercharger A Overboost Condition

on 2014 Ram 2500 6.7L I6 Cummins Diesel ยท 4WD

What this code means

The boost pressure has exceeded the maximum allowed value.

Symptoms

  • Check Engine Light
  • Excessive power then limp mode
  • Whining turbo noise
  • Possible engine damage

Common causes

  • Wastegate stuck closed
  • Boost control solenoid failure
  • Boost pressure sensor fault
  • Blocked wastegate actuator hose

Diagnostic steps

  1. Check wastegate operation
  2. Test boost control solenoid
  3. Monitor boost pressure
  4. Inspect vacuum lines to wastegate

Repair notes

Address immediately to prevent engine damage. Check wastegate and boost control.

Other Powertrain codes on this vehicle

๐Ÿ”ง Database maintained under the daily editorial review of Chris Hackleman ยท Master Technician ยท 20+ years. Spot an error? Use the Help link above โ€” a human reads every report.
Stuck on this repair? Take it to The Diag Desk โ€” ask a master tech about this exact car โ†’ real human answer within 24h, never AI
๐Ÿ”“ LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Anonymous Sponsor paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Anonymous.
Free another vehicle โ†’
Building an app?
Free API access to all this data โ€” 10 requests/day, no card required.
Get an API key โ†’
Run a shop?
Manage repairs, estimates, and customers with ShopBase โ€” $249/mo, all features included.
Try ShopBase โ†’