P0335high severityPowertrain

Crankshaft Position Sensor A Circuit

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

Malfunction in the crankshaft position (CKP) sensor circuit. The CKP sensor is critical for engine timing and operation.

Symptoms

  • Check Engine Light
  • No start condition
  • Engine stalling
  • Intermittent misfire
  • Tachometer erratic or dead

Common causes

  • Faulty CKP sensor
  • Damaged reluctor/tone ring
  • Wiring issue
  • Sensor gap incorrect
  • Oil contamination on sensor

Diagnostic steps

  1. Test CKP sensor resistance
  2. Check air gap
  3. Inspect reluctor ring for damage
  4. Test wiring continuity
  5. Scope CKP signal pattern

Repair notes

Replace CKP sensor. Check reluctor ring. CKP variation learn may be needed after replacement.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →