P1388high severityPowertrain
Auto Shutdown Relay Circuit
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
The PCM has detected a malfunction in the Auto Shutdown (ASD) relay circuit. The ASD relay provides power to the fuel injectors, ignition coils, oxygen sensor heaters, and other critical engine management components.
Symptoms
- Check Engine Light
- Engine may not start
- Engine stalls and will not restart
- Intermittent no-start condition
- Loss of injector and coil power
Common causes
- Faulty ASD relay
- Wiring open or short in ASD relay circuit
- Corroded ASD relay socket
- PCM driver circuit failure
- Blown ASD fuse
Diagnostic steps
- Swap ASD relay with a known good relay
- Check ASD relay socket for power, ground, and PCM control signal
- Inspect ASD relay wiring for opens or shorts
- Test PCM ASD control output
- Check ASD fuse
Repair notes
Replace the ASD relay and inspect the relay socket for corrosion or damage.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1