P1681moderate severityPowertrain
No I/P Cluster CCD/J1850 Messages Received
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
The PCM is not receiving messages from the instrument panel cluster over the CCD/J1850 bus. This is a Chrysler-specific code with no direct OBD-II generic equivalent.
Symptoms
- Inaccurate gauges
- Warning lights on
- Cluster not updating
Common causes
- Faulty instrument cluster
- CCD/J1850 bus wiring fault
- Bad connector or ground
- Faulty PCM
Diagnostic steps
- Scan all modules for codes
- Inspect CCD/J1850 bus wiring
- Check cluster power and ground
- Test bus communication with scope
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1