P1684low severityPowertrain

Battery Was Disconnected Within Last 50 Starts

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The PCM has recorded that battery power was lost or disconnected within the last 50 engine start cycles. This is an informational code that indicates the PCM adaptive memory was reset and the system is relearning.

Symptoms

  • Check Engine Light (temporary)
  • Slightly rough idle during relearn
  • Transmission may shift differently during relearn
  • Fuel economy temporarily reduced

Common causes

  • Battery recently disconnected for service
  • Battery replaced
  • Loose or corroded battery cable
  • PCM fuse momentarily lost power
  • Parasitic drain completely discharged battery

Diagnostic steps

  1. Clear the code and drive through 50 start cycles to allow it to expire
  2. If battery was not intentionally disconnected, check battery cables for looseness
  3. Test battery condition and charging system
  4. Check for parasitic electrical drain
  5. Inspect PCM power supply fuses

Repair notes

This code will clear itself after approximately 50 key-on cycles; no repair needed unless the battery disconnect was unintentional.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →