P3015moderate severityPowertrain

Intake Valve Control Solenoid Circuit Intermittent Bank 1

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The intake valve control solenoid on Bank 1 has an intermittent electrical fault. Continuous VVT systems use this solenoid to control cam phasing oil flow.

Symptoms

  • Check Engine Light comes and goes
  • Intermittent rough idle
  • Sporadic power loss
  • Variable valve noise
  • Inconsistent fuel economy

Common causes

  • Loose solenoid connector
  • Wiring chafing against engine
  • Solenoid internal intermittent failure
  • Thermal expansion causing contact loss
  • Corroded pins

Diagnostic steps

  1. Monitor VVT solenoid command vs cam position
  2. Wiggle test on solenoid connector
  3. Inspect wiring harness routing
  4. Check connector pin tension
  5. Test solenoid at operating temperature

Repair notes

Repair connector or replace VVT solenoid. Re-route wiring away from heat sources.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →