P3043high severityPowertrain

DCT Clutch Actuator B Position Error

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The DCT clutch B actuator is not reaching the commanded position.

Symptoms

  • Check Engine Light
  • Harsh shifts in even gears
  • Difficulty engaging 2nd gear
  • Grinding noise on even gear shifts
  • Transmission jerking on upshifts
  • Delayed 2nd gear engagement

Common causes

  • Faulty clutch B actuator
  • Hydraulic leak in B circuit
  • Position sensor failure
  • Mechanical binding
  • Low hydraulic system pressure

Diagnostic steps

  1. Read clutch B actuator position PID
  2. Command actuator through range
  3. Check hydraulic fluid
  4. Inspect for leaks
  5. Test actuator motor

Repair notes

Replace clutch B actuator assembly. Perform teach-in procedure.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →