P3063high severityPowertrain

Torque Converter Clutch Capacity Low

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The torque converter clutch is not transmitting the expected amount of torque. Slip is detected beyond the normal engagement tolerance.

Symptoms

  • Check Engine Light
  • TCC shudder at highway speed
  • Slight RPM fluctuation at cruise
  • Reduced fuel economy at highway
  • Torque converter area overheating
  • Vibration at steady throttle

Common causes

  • Worn torque converter clutch lining
  • Degraded transmission fluid
  • TCC apply solenoid weak
  • Internal seal leak
  • TCC damper spring failure

Diagnostic steps

  1. Monitor TCC slip PID at steady cruise
  2. Check transmission fluid condition
  3. Test TCC apply pressure
  4. Inspect TCC solenoid operation
  5. Perform stall speed test

Repair notes

Replace torque converter. Flush transmission fluid. Some vehicles respond to fluid replacement alone.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →