P3602moderate severityPowertrain

Intelligent Battery Sensor (IBS) Circuit Malfunction

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The intelligent battery sensor that monitors 12V battery current, voltage, and temperature has a circuit fault. The IBS is critical for start-stop and energy management.

Symptoms

  • Start-stop disabled
  • Battery charge management affected
  • Incorrect battery status display
  • Alternator not properly regulated
  • Parasitic draw calculation incorrect

Common causes

  • IBS sensor failure
  • Corroded battery terminal affecting IBS
  • IBS wiring damage
  • Battery replaced without IBS re-registration
  • IBS communication fault

Diagnostic steps

  1. Read IBS data via scan tool
  2. Check IBS connector and mounting
  3. Test IBS communication on LIN bus
  4. Verify battery registration status
  5. Measure IBS signals vs actual battery parameters

Repair notes

Replace IBS sensor if faulty. After battery replacement, always register new battery with the IBS/BMS system.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →