P3606moderate severityPowertrain

Start-Stop 12V Battery State of Health Below Threshold

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The 12V AGM or EFB battery state of health has degraded below the minimum threshold required for reliable start-stop operation.

Symptoms

  • Start-stop permanently disabled
  • Battery management warning
  • 12V battery struggles in cold weather
  • Electrical systems may exhibit issues
  • Start-stop light always off
  • Higher fuel consumption without start-stop

Common causes

  • Battery age exceeding service life
  • Excessive parasitic draw degrading battery
  • Battery not properly maintained
  • Wrong battery type installed (non-AGM/EFB)
  • Frequent short trips not fully recharging battery

Diagnostic steps

  1. Read battery state of health via IBS/BMS
  2. Load test 12V battery
  3. Check battery type matches vehicle specification
  4. Test charging system output
  5. Measure parasitic draw

Repair notes

Replace 12V battery with correct AGM or EFB specification. Register new battery with vehicle BMS. Standard flooded batteries are not suitable for start-stop vehicles.

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →