P3890moderate severityPowertrain
Exhaust Pressure Control Valve Malfunction
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
The exhaust pressure control valve (exhaust brake or back-pressure valve) has a malfunction. This valve can be used for exhaust braking and to raise exhaust temperature.
Symptoms
- Check Engine Light
- No exhaust braking function
- Reduced DPF regen capability
- Engine braking feel reduced
- Exhaust temperature management affected
Common causes
- Valve actuator failure
- Carbon buildup on valve
- Vacuum/pressure line disconnected
- Valve position sensor fault
- Wiring harness damage
Diagnostic steps
- Command exhaust brake on/off with scan tool
- Monitor valve position vs commanded
- Check actuator vacuum/pressure supply
- Test valve position sensor
- Inspect valve for carbon deposits
Repair notes
Replace exhaust pressure control valve or actuator. Clean carbon deposits from valve and housing.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1