U0181low severityNetwork
Lost Communication With Headlamp Leveling Control Module
on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD
What this code means
The network has lost communication with the headlamp leveling control module. This can cause improper headlight aim.
Symptoms
- Headlight leveling not working
- Lighting warning message
- Headlamps aimed too high or low
Common causes
- Faulty bus wiring or connectors
- Poor ground connection
- Failed headlamp leveling module
- Blown fuse
Diagnostic steps
- Scan modules for communication codes
- Check module power and ground
- Inspect bus wiring and connectors
- Verify bus signal integrity
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus