U0427low severityNetwork

Invalid Data Received From Fuel Fired Heater Control Module

on 2014 Ram 2500 6.7L I6 Cummins Diesel · 4WD

What this code means

The vehicle's network is receiving corrupt or implausible data from the fuel fired (auxiliary) heater control module. This usually points to a communication fault or a problem inside the heater module itself.

Symptoms

  • Auxiliary heater not working
  • Warning light on dash
  • Poor cabin or engine heating in cold weather

Common causes

  • Faulty fuel fired heater control module
  • Wiring or connector corrosion at module
  • CAN bus communication fault
  • Low battery voltage or bad ground

Diagnostic steps

  1. Scan all modules for related U-codes
  2. Check heater module wiring and connectors
  3. Verify power and ground at module
  4. Test CAN bus signals for the module

Other Network codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years and Jeff Moore · Master Mechanic · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
🔓 LIBERATED FOREVER
The 2014 Ram 2500 6.7L I6 Cummins Diesel repair data is free for every DIYer and shop on earth, permanently, because Lost Pines Precision Automotive, Bastrop, TX paid $99 to unlock it.
Mitchell1 charges $169/mo for this. ALLDATAdiy charges $30/yr per vehicle. Open Labor Project is free permanently, because of community sponsors like Lost.
Free another vehicle →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →