B0241low severityBody
Sunroof Position Sensor Circuit
on 2007 Ram 3500 5.9L I6 Cummins · 4WD
What this code means
The sunroof position sensor is not providing valid position data, preventing the auto-close feature from functioning.
Symptoms
- One-touch sunroof open/close not working
- Sunroof does not auto-reverse on obstruction
- Express open/close disabled
- Sunroof control module fault
Common causes
- Faulty position sensor
- Sensor wiring damage
- Sunroof motor encoder failure
- Control module needs initialization
Diagnostic steps
- Perform sunroof initialization procedure
- Check position sensor wiring
- Test sensor output during movement
- Inspect motor encoder
Repair notes
Re-initialize sunroof per manufacturer procedure. Replace motor assembly if encoder is faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0006
Passenger Knee Airbag Deployment Circuit
B0007
Rear Left Side Airbag Deployment Circuit
B0008
Rear Right Side Airbag Deployment Circuit
B0010
Driver Side Airbag Deployment
B0011
Driver Side Airbag Deployment Circuit Open