P0802low severityPowertrain
Transmission MIL Request Circuit Open
on 2007 Ram 3500 5.9L I6 Cummins · 4WD
What this code means
An open circuit was detected in the line the transmission control module uses to request the malfunction indicator lamp. This can prevent proper illumination of transmission fault warnings.
Symptoms
- MIL may not illuminate for trans faults
- Warning lamp behavior abnormal
- Related transmission codes stored
Common causes
- Open wiring in MIL request circuit
- Corroded or loose connector
- Faulty TCM output driver
- Instrument cluster fault
Diagnostic steps
- Retrieve all stored codes
- Inspect MIL request wiring for opens
- Check TCM and cluster connectors
- Test continuity between TCM and cluster
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1