U0338moderate severityNetwork
Lost Communication With Multi-Axle Suspension Control Module
on 2007 Ram 3500 5.9L I6 Cummins · 4WD
What this code means
The vehicle network has lost communication with the multi-axle suspension control module. This can affect ride height and load leveling functions.
Symptoms
- Suspension warning light on
- Ride height incorrect
- Rough or uneven ride
Common causes
- Faulty suspension control module
- Wiring or connector fault on CAN bus
- Blown module fuse or bad ground
- Corroded module connectors
Diagnostic steps
- Scan all modules for communication codes
- Check power and ground at the module
- Inspect CAN wiring for the module
- Test module data on the network
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus