Free API
6.7L I6 CumminsRWDdieselISBturbo
11 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P2616moderate severityPowertrain

Camshaft Position Signal Intermittent

on 2018 Ram 3500 6.7L I6 Cummins · RWD

What this code means

The camshaft position (CMP) signal is dropping out or intermittent. The module loses cam timing reference, affecting fuel and spark control.

Symptoms

  • Engine stalling
  • Hard starting
  • Rough running or hesitation

Common causes

  • Faulty camshaft position sensor
  • Damaged wiring or connector
  • Reluctor wheel damage
  • Poor ground connection

Diagnostic steps

  1. Scan for CMP related codes
  2. Inspect sensor and wiring
  3. Check signal on scope
  4. Replace camshaft sensor if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2018 Ram 3500 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Ram 3500 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →