Free API
🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2025 RENAULT CLIO

1.0L I3 Turbo TCe 100•FWD•AUTOMATIC•gas•H4D•turbo
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Clio →

Factory-verified torque specsnone yet for this vehicle

No torque value on this vehicle has been checked by hand yet. The full list below is estimated.

Codes, recalls, maintenance

Full specs
5-Year Cost of Ownership
$15,763 maintenance + known platform issues
~$3,153/yr · 260¢/mile equivalent · $6,629 maintenance + $6,534 expected platform issues
Compare this engine
vs
1.0L I3 TCe 90
vs
1.6L I4 Hybrid E-Tech 145
vs
1.3L I4 TCe 130

Common Problems & Known Issues

The 2025 Clio is still too new for extensive field data, but the platform carries forward known TCe engine vulnerabilities and E-Tech hybrid complexity. Early TCe engines (90/100/130) show timing chain and lifter issues inherited from prior generations, while the dual-clutch transmission in hybrids has tight tolerances requiring meticulous fluid service.

Timing Chain Stretch and Tensioner Failure (TCe Engines)

Common · high severity
Typical onset: 60,000-90,000 mi
Symptoms: Cold-start rattle lasting 3-5 seconds, Check engine light with cam/crank correlation codes, Metallic ticking that worsens with mileage, Loss of power under acceleration
Fix: Requires timing chain kit, tensioners, guides, and often VVT solenoids. Engine front disassembly with special locking tools. 8-12 hours labor depending on access and whether head comes off for inspection.
Estimated cost: $2,200-3,800

Hydraulic Lifter Collapse (1.0L and 1.3L TCe)

Common · medium severity
Typical onset: 50,000-80,000 mi
Symptoms: Persistent ticking from valve cover area, Rough idle when hot, Misfires on specific cylinders, Noise increases with oil degradation
Fix: All lifters should be replaced as a set with cam followers. Head removal recommended for thorough inspection. Often overlaps with timing chain work. 10-14 hours if doing head R&R, valve job, and reassembly.
Estimated cost: $2,800-4,500

E-Tech Hybrid Transmission Overheating and Shudder

Occasional · medium severity
Symptoms: Harsh shifts in stop-and-go traffic, Transmission temperature warning on dash, Jerking when transitioning from electric to combustion mode, Delayed engagement from Park
Fix: Often traced to degraded transmission fluid or failing oil cooler. Fluid change requires specific Elf Renault Matic oil and precise fill procedure. Cooler replacement adds 3-4 hours. If clutches are damaged, expect hybrid gearbox removal at 12+ hours.
Estimated cost: $800-1,200 fluid service, $2,500-5,000 if cooler or internal damage

Head Gasket Failure (1.3L TCe 130)

Occasional · high severity
Typical onset: 70,000-110,000 mi
Symptoms: Coolant loss with no visible leaks, White smoke from exhaust on cold start, Oil cap shows milky residue, Overheating under load
Fix: Head must come off, be checked for warpage, and often requires machining. Timing components, gaskets, and coolant system refresh. Head studs recommended over bolts. 12-16 hours including machine shop time.
Estimated cost: $3,200-5,000

Harmonic Balancer Wobble and Separation

Rare · high severity
Typical onset: 80,000-120,000 mi
Symptoms: Vibration felt through steering wheel at idle, Squealing from serpentine belt area, Visible wobble on crankshaft pulley, Oil leak from front main seal due to imbalance
Fix: Balancer replacement requires removal of wheel, fender liner, and accessory drive. Crankshaft holding tool and puller essential. Check for crank snout damage. 3-5 hours labor.
Estimated cost: $600-1,100

Transmission Mount Collapse (All Models)

Common · low severity
Typical onset: 40,000-70,000 mi
Symptoms: Clunk when shifting from Reverse to Drive, Excessive engine movement visible from engine bay, Vibration through shifter or center console, Harsh engagement into gear
Fix: Lower transmission mount most common failure point. Requires jacking transmission slightly to relieve load. 1.5-2.5 hours per mount. Often worth replacing engine mounts simultaneously.
Estimated cost: $350-700
Owner tips
  • Use only Renault-spec 0W-20 or 5W-30 oil (RN17 standard) and keep intervals strict at 6,000 mi to protect timing chain and lifters
  • E-Tech hybrid transmission fluid should be changed at 60,000 mi regardless of 'lifetime fill' claims—heat degrades it faster than traditional automatics
  • Inspect timing chain tension at every major service after 50,000 mi; early intervention saves engines
  • Avoid extended idling and short trips on TCe engines—carbon buildup accelerates lifter sticking
Buy with caution after 60k miles unless timing chain and lifters have documented replacement; the E-Tech hybrid is promising but unproven for longevity, and TCe gasoline engines demand religious maintenance to avoid expensive top-end work.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API key: 10 requests/day, 100/month, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, built by the same team.
See what's included →