Free API
🌍 International coverage, work in progress. This Russian-market vehicle is part of our hand-curated international catalog. We are filling in labor times, torque specs and fluids as fast as we can verify them, so some numbers may be missing or marked estimated for now. Do you work on these vehicles in the EU, Russia, or the JDM scene? Help us get it right: send real shop times or corrections to [email protected], or request the data you need and it joins the verification queue.

2021 RENAULT LOGAN BR

1.6L I4 SCe Flex•FWD•AUTOMATIC•gas
Be the first sponsor for this vehicle

For $99, we generate the full set of step-by-step repair procedures for this exact vehicle. Free for everyone, forever, with your name on every one.

Sponsor — $99
Dead battery / stuck in Park? Emergency neutral procedure for this Logan BR →

Factory-verified torque specsnone yet for this vehicle

No torque value on this vehicle has been checked by hand yet. The full list below is estimated.

Codes, recalls, maintenance

Full specs
5-Year Cost of Ownership
$9,599 maintenance + known platform issues
~$1,920/yr · 160¢/mile equivalent · $6,113 maintenance + $2,786 expected platform issues
Compare this engine
vs
1.0L I3 SCe Flex

Common Problems & Known Issues

The 2021 Renault Logan BR (Brazilian market) is a budget-focused sedan built on the aging B0 platform. The 1.0L SCe and 1.6L SCe flex-fuel engines are proven workhorses but suffer from upper-end valvetrain wear and cooling system issues when maintenance is deferred or low-quality ethanol fuel is used consistently.

Hydraulic Lifter Collapse and Valve Train Noise

Common · medium severity
Typical onset: 60,000-90,000 mi
Symptoms: Loud ticking or tapping from engine at startup that persists after warmup, Loss of power under acceleration, Check engine light with misfire codes, Rough idle
Fix: Replace all hydraulic lifters/tappets, inspect camshaft lobes for wear, flush oil system. Often requires cylinder head removal for proper access and cam inspection. 6-8 hours labor for complete lifter replacement with head R&R if cam shows scoring.
Estimated cost: $800-1,400

Timing Chain Stretch and Tensioner Failure

Occasional · high severity
Typical onset: 80,000-120,000 mi
Symptoms: Rattling noise from front of engine on cold start, Engine runs rough or won't start, Check engine light with timing correlation codes, Metal shavings in oil
Fix: Replace timing chain, guides, tensioner, and both sprockets. Must inspect oil pump drive. Often combined with water pump replacement. 8-10 hours labor, critical to use OE-spec parts due to flex-fuel corrosion concerns.
Estimated cost: $1,200-1,800

Head Gasket Failure (1.6L SCe)

Occasional · high severity
Typical onset: 70,000-110,000 mi
Symptoms: Coolant loss with no visible leaks, White smoke from exhaust, Overheating especially in traffic, Oil contamination in coolant reservoir, Rough running when cold
Fix: Head gasket replacement with cylinder head resurfacing. Must pressure-test head for cracks (common on 1.6L). Includes timing components and all coolant hoses. 10-12 hours labor. Head often needs replacement if warped beyond spec.
Estimated cost: $1,400-2,200

Automatic Transmission Oil Cooler Clogging

Common · medium severity
Typical onset: 50,000-80,000 mi
Symptoms: Transmission overheating warning light, Harsh or delayed shifts when hot, Burnt transmission fluid smell, Slipping between gears in stop-and-go traffic
Fix: Replace transmission oil cooler, flush cooling system, replace transmission fluid and filter. Often the cooler integrated into radiator clogs with debris. 3-4 hours labor. Preventable with regular fluid changes every 30k mi.
Estimated cost: $600-950

Transmission Mount Collapse

Common · low severity
Typical onset: 40,000-70,000 mi
Symptoms: Clunking when shifting from Park to Drive, Excessive engine movement visible when accelerating, Vibration through cabin at idle, Difficulty engaging gears
Fix: Replace engine/transmission mount (typically right-side mount fails first). 1.5-2 hours labor. Hydraulic mounts are poor quality on BR-spec models. Aftermarket polyurethane options last longer but increase NVH.
Estimated cost: $200-350

Harmonic Balancer Deterioration

Occasional · medium severity
Typical onset: 75,000-100,000 mi
Symptoms: Vibration that increases with RPM, Squealing from serpentine belt area, Visible wobble of crankshaft pulley, Accessory belt repeatedly throwing or wearing
Fix: Replace harmonic balancer/crankshaft pulley. Rubber isolator separates from hub due to heat and ethanol fuel vapors. 2-3 hours labor. Must use proper puller tool to avoid crankshaft damage.
Estimated cost: $350-550

Fuel Filter Clogging (Flex-Fuel Issues)

Common · low severity
Symptoms: Hard starting especially after sitting overnight, Loss of power above half throttle, Engine stumbling or cutting out under load, Check engine light with lean fuel trim codes
Fix: Replace fuel filter, often multiple times per year with high ethanol content fuel. Located under vehicle near tank. 0.5-1 hour labor. Brazilian ethanol attracts moisture and causes accelerated filter degradation. Should be on 15,000 mi service interval with E85+ usage.
Estimated cost: $80-150
Owner tips
  • Change oil every 5,000 mi maximum with quality synthetic to prevent lifter and timing chain issues — flex-fuel creates more combustion byproducts
  • Service transmission fluid every 30,000 mi regardless of 'lifetime fill' claims; cooler clogs quickly in Brazilian climate
  • Use TOP TIER detergent gasoline when available and avoid ethanol content above E50 for extended highway driving to reduce valve deposits
  • Inspect timing chain at 60k mi via oil cap inspection; early replacement at first sign of slack prevents catastrophic failure
  • Replace fuel filter annually if running high-ethanol blends; carry spare for emergencies
Buy only if meticulously maintained with documented short oil change intervals and transmission services; budget $1,500/year for deferred maintenance on typical used examples — valvetrain and timing components are Achilles heel of otherwise reliable platform.
AI-assisted summary drawn from NHTSA recall data, our labor-times database, and platform knowledge. Not a substitute for a pre-purchase inspection on a specific vehicle.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years.
Stuck on a repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
Building an app?
Free API key: 10 requests/day, 100/month, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, built by the same team.
See what's included →